Outfitted together with the zero leak bidirectional checking sole-noid valves, this electrical power unit is intended to the operation of two independent circuits. Which are respectively for that most important and subordinate platforms from the double scissors lift. Two cut-off valves are used for lowering the machine manually in case of power loss. If additional independent circuits are expected for your application please get in touch with us for availability.
Remark: 1. Please talk to our product sales engineer for the distinct pump displacement, motor power or tank capacity.
two. CSA or UL licensed motors are available upon request.
1. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean every one of the hydraulic parts concerned prior to set up of the energy unit.
three. Viscosity of your oil shoud be 15~46 cst,and the oil should really be clean and free of charge of impurities,N46 hydraulic oil is proposed.
four. The power unit should be mounted vertically.
five. Check the oil level in the tank just after the initial operating of the power unit.
six. Oil modifying is required soon after the first 100 operation hrs,afterwards once every single 3000 hrs.