Material Handling Power UNIT two
This electrical power unit functions electrical power up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve together with the reducing velocity managed by the pressure compensated movement manage valve. Products of this series can be widely used in the industry of logistic devices which include fork lift, mini lift table, and so on.
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned in advance of mounting the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities, N46 hydraulic oil is suggested .
four. Oil changing is needed immediately after the first a hundred operation hrs,afterwards as soon as every single 3000 hrs.
five. The power unit need to be mounted horizontally.
Material Managing Power UNIT one
This electrical power unit is made for the fork lift market, consisting of very effective gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down movement are managed by the lever of your manual release valve, that is equipped with an electric switch to activate the motor. The lowing velocity is controlled through the stress compensated flow manage valve.
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned prior to set up of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities, N46 hydraulic oil is advised .
4. Oil changing is needed following the preliminary 100 operation hrs, afterwards when every 3000 hours.
five. The electrical power unit proven is built to be mounted horizontally.