ep

January 19, 2021

General Description
This electrical power unit features a long term magnet motor which has a power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing velocity controlled from the stress compensated flow manage valve. Goods of this series might be broadly utilized in the sector of logistic devices such as fork lift, mini lift table, etc.
Distinctive Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean every one of the hydraulic parts concerned before installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities. N46 hydraulic oil is suggested.
four. This energy unit is intended to be mounted vertically.
5. Check the oil degree in the tank soon after the primary star on the electrical power unit.
six. Oil altering is needed following the initial 100 operation hours,afterwards when just about every 3000 hours.
7. More pump sizes and tank sizes are avaiable upon request.