Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate material managing tools. The decreasing movement is achived from the solenoid valve together with the lowering speed managed by an adjustable needle valve. The left and correct functions are outfitted having a dual pilot operated check out valve and cross-over relief valves.
Remark: Please consult our product sales engineer for that unique pump displacement, motor power or tank capability.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities.N46 hydraulic oil is suggested.
four. This power unit needs to be mounted horizontal.
five. Check the oil level during the tank just after the 1st get started of your electrical power unit.
six. Oil transforming is required immediately after the original 100 operation hrs, afterwards the moment every single 3000 hours.